|
Post by pjr3 on Jan 10, 2018 21:24:33 GMT
Is there any easy way to take apart the human figures in the Kong line? Is it just a matter of removing the screw? I ask because the torso of the figure looks like it's fused together rather than just being held by the screw. Any help will be appreciated. Thank You!
|
|
|
Post by AWCramer on Jan 10, 2018 23:16:34 GMT
They all use older figure molds so it should just be a matter of removing the screw and prying apart the torso.
|
|
|
Post by pjr3 on Jan 10, 2018 23:29:00 GMT
They all use older figure molds so it should just be a matter of removing the screw and prying apart the torso. Thanks! I wanted to check before I tried it.
|
|
|
Post by AWCramer on Jan 11, 2018 8:54:21 GMT
I havent tried myself to open the Kong ones though as I don't have any extras of those but they should behave the same...
|
|
|
Post by jknox33 on Jan 11, 2018 18:17:37 GMT
Yes, it is just the screw. However, sometimes the factory glue makes it harder to take a part.
|
|
|
Post by pjr3 on Jan 11, 2018 21:54:36 GMT
Yes, it is just the screw. However, sometimes the factory glue makes it harder to take apart. Thanks for the information on the glue. I took a part an extra Samuel L. Jackson figure. Removing the screw wasn't enough so I put the figure in very hot water for a few minutes to soften it up. I had to use a tiny flat head screwdriver to gently pry the torso enough to loosen it.
|
|